Print PDF
Favorite
Email
Step 1Disassemble
Ensure the webcam is disconnected from the computer.
Remove any base the webcam may have. You then need to remove any exterior screws (use the screwdriver). The case should then separate to reveal the insides, however if it doesn't try and prise the case apart using the end of a flat screwdriver or penknife. You shouldn't need too much force, and remember to check under pads and stickers for screws.
You may also want to remove the USB connection lead from the main board to give you more movement if the cable's position is fixed.
Remove any base the webcam may have. You then need to remove any exterior screws (use the screwdriver). The case should then separate to reveal the insides, however if it doesn't try and prise the case apart using the end of a flat screwdriver or penknife. You shouldn't need too much force, and remember to check under pads and stickers for screws.
You may also want to remove the USB connection lead from the main board to give you more movement if the cable's position is fixed.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
