Introduction: Install 2015+ Subaru WRX STi JDM WRX DRL Fog Light Bezels

Picture of Install 2015+ Subaru WRX STi JDM WRX DRL Fog Light Bezels

The Subaru WRX/WRX STi is a perfect car for the JDM enthusiast and also rally lovers. This car is screaming JDM and a way to make it even more is to add these iJDMTOY Subaru WRX LED DRL Bezels. It’s quick and simple to install so let’s get started.

Step 1:

Picture of

The first step is to take off the Fog Lamp Bezel and to do
that, you’re going to grab in between the fog light and turn signal and pull outwards. Do the same on the other side.

Step 2:

Picture of

Grab your new WRX LED Daytime Running Light Bezels and put the wires through the middle hole and feed it all in. Then carefully pop in your new JDM style bezel.

Step 3:

Picture of

Route your wires to the driver’s side where the battery is and then connect both LED wires to the module box. Then tap the black wires to battery negative and the red wire to ACC 12V located where the arrow is pointing.

Step 4:

Picture of

Test and make sure everything works before closing everything up.

Step 5:

Picture of

These OEM Fit LED Daytime Running Lights are perfect for those looking to change up their car and make their front more aggressive. Not only do they look great but complete a JDM facelift for your car that people love. Stand our from the rest of the Subaru's with these iJDMTOY Subaru LED Fog light Bezel.


About This Instructable




Bio: Everything about automotive LED lights
More by ilovejdmtoy:Install Ford F-150 Raptor Rear LED High Mount Reverse Tail LightInstall 2015-up Dodge Charger License Plate Relocation KitInstall 100W CREE LED Lightbar Foglamps for Ford Raptor
Add instructable to: