Introduction: Install Debian OS on NanoPi S2 EMMC

By Checkout

The NanoPi S2(S2) is designed and developed by FriendlyElec for professionals, enterprise users, makers, and hobbyists. It is a small board with WiFi, Bluetooth, and eMMC. It uses the Samsung Quad Core Cortex-A9 S5P4418 SoC with dynamic frequency scaling up to 1.4GHz. It has 1G DDR3 RAM, 802.11 b/g/n WiFi & Bluetooth 4.0 module. Its inbuilt power management unit uses the AXP228 chip which supports software shutdown. It takes power over the MicroUSB port. It has video input/output interface, 3.5mm audio jack, USB port, and MicroSD card slot, serial debug port and ADC pin-header. An Android and a Debian images are ready for this awesome SBC. The Android OS supports HDMI and LCD output.

Along with it has various interfaces, ports such as LVDS, and GPIOs which are compatible with Raspberry Pi’s GPIOs. Its PCB dimension is 40 * 75 mm. The NanoPi S2 works with most of the modules and OS images that are developed for FriendlyElec’s S5P4418 based boards. Source: http://bit.ly/2lvM1lC

Links :
Check Out this SBC: http://bit.ly/2ptw7xM

All OS with eFlasher for Download: http://bit.ly/2rrepLl

Win32 Disk Imager: http://bit.ly/2n3Lfwg

SD Formatter Windows: http://bit.ly/2ofKfFL

WiKi Page : http://bit.ly/2lvM1lC

Buy : http://bit.ly/2pZqcR3

Access GPIO using SysFS of NanoPi S2 : http://bit.ly/2qiOTHj

********************************************************************

You can Subscribe on YouTube by clicking this link to show your support and be updated with latest video on the channel like this :http://bit.ly/2d8pHge

You can even support by making small donation on Patreon : http://bit.ly/2jcjTSo ___________________________________________

Check out my YouTube channel for other video tutorials.