Introduction: Install LED License Plate Light

Halogen license plate bulbs are dim and quite unsightly looking. Many people choose to swap out their halogen lights for LED to get that new, crisp glow. Upgrading to LED is actually very simple and you can get tons of LED license plate bulbs on Amazon with the simple click of a button. Lots of people love LED license plate lights and you will start to see more and more on the road.

Step 1:

Take a flat head screwdriver and remove the license plate housing cover.

Step 2:

Remove the bulb housing.

Step 3:

Remove the stock license plate bulb.

Step 4:

Directly replace with the new LED license plate bulb. If it doesn't light up, flip the LED bulb 180 degrees.

Step 5:

Put everything back the same way it was removed.

Step 6:

This T10 LED license plate bulb works for a number of vehicles in an assortment of different LED license plate light sizes and would look geat as an upgrade for any car.

Comments

About This Instructable

3,521views

1favorite

License:

Bio: Everything about automotive LED lights
More by ilovejdmtoy:Install Ford F-150 80W High Power CREE LED FoglampInstall Dodge RAM LED Light BarsInstall Fluid Style Rear LED Bumper Reflector Foglamps
Add instructable to: