Introduction: Install Zwave LED Bulb on TimeSquAir

A 2-minute recipe to install the Zwave LED Bulb on TimeSquAir


  • 1 TimeSquAir (Link)
  • 1 Zwave LED Bulb (Link)


  • Recipe "Install Zwave on TimeSquAir"

Step 1: Recipe

Picture of Recipe

1- Pair the Zwave LED Bulb to the Zwave GEN5 USB stick

  • Push the USB stick's button
  • It blinks blue
  • Switch on the Zwave LED Bulb
  • It blinks green and lights on

2- Plug the Zwave USB stick on TimeSquAir

3- Restart Node-RED

4- The Zwave LED Bulb node appears in the workspace

You're done!

Step 2: Example: Change LED Bulb's Color

Picture of Example: Change LED Bulb's Color

Insert a Color node, change its color. Connect this Color node to the LED Bulb's node, and add a Go node.

After activation, you'll see the LED Bulb's color change when you press the Go node.


About This Instructable




Bio: The ThingBox Project - A ready to flash Raspberry Pi image that contains Node-RED and Internet Of Things software for non developers.
More by thethingbox:Telegram Bot and TimeSquAir: the BedrockInstall Zwave Soft Remote on TimeSquAirInstall Zwave LED Bulb on TimeSquAir
Add instructable to: