With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
About a month ago, I installed a Yoshimura R77-D slip on pipe for my bike. After installing it, I heard how great my bike sounded but realized that it...
The passenger seat can be removed by using the key on the right side of the bike. Turn the key in the clockwise position and hold it while pulling the...
Now that the seats are off, we can start our installation. Slide the PCV main box unit from under the main seat into the rear seat compartment. I foun...
This step is pretty straight forward. Connect the supplied ground wire into your batteries negative lead.
There are 2 screws on each side of the front cowl. Use an allen key to take these off. Once off, slide cowl forward and simply take off.
Once the cowl is off, unscrew the two front screws, one on each side of the gas tank. I used a piece of wood to prop the tank up.
Once the tank has been propped. Find the 16 pin connector under the tank. Unplug connector and plug it in line with the PCV connectors. Watch out it g...
Start with the fuel tank. Then re install the front cowl and the main seat.
Now just install the supplied Dyno jet software and plug PCV box to the laptop via USB. The Dynojet website has maps readily available for download fo...
Just in case anyone was wondering about what my dyno chart looks like after install, here it is. Thats a gain of 4.54 hp and 2.01 lbs of torque.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »