Introduction: Instant Recycled Bracelet
A bracelet made from an old watch... Took me 5 mins to make... And also completely modifiable...
Step 1: Things Used..
1.An Nail cutter or a wire cutter
2.An old watch
3.Wire
Step 2: Disassemble...
Disassemble the watch. You can do it with a brute force or use pliers... Just remove the pins connecting the watch and the strap..
We'll need only the straps so discard everything from the work area..
Step 3: The Wire
Cut 3/4" wire. Use cutting pliers.. I used a nail cutter though...
Step 4: Connect the Straps
Use the wire to connect the strap as shown in the figure..
Step 5:
Straighten the straps to bend the wire...
Step 6: Looping
Cross loop the wires as shown..
Step 7: Wear It!!!
Wear it with pride..
You have just
1.Recycled your old watch
2.Made your own bracelet
3.Saved Gasoline and Time running to store
Step 8: Optional:
You can solder the wires but i left it for further modifications if an idea pops-up...
You can also attach pendents or something else between the wires...
Thank you for spending your time viewing...
Participated in the
Craft Contest
Participated in the
Jewelry Contest