Print PDF
Favorite
Email
Step 3Folded arms...
Now that the arms are completed, place them on the layout to see where the arms will go.
It helps to now mark where the arms will go.
Because we want a nice finshed seam around the heart, we will be turning the final assembly inside out.
Place the arms between the two pieces of the main body of the Robo-heart. Line up the end of the arm with the marks you made on the outside.
Start sewing around to close up the main body. You will need to fold over the arm inside the main body so that the sewing machine can sew around the outside.
Important: Leave a 2inch or wider gap at the bottom or pointy end of the main body in order to get the arms out when you turn/flip everything inside out. You will sew it up later.
It helps to now mark where the arms will go.
Because we want a nice finshed seam around the heart, we will be turning the final assembly inside out.
Place the arms between the two pieces of the main body of the Robo-heart. Line up the end of the arm with the marks you made on the outside.
Start sewing around to close up the main body. You will need to fold over the arm inside the main body so that the sewing machine can sew around the outside.
Important: Leave a 2inch or wider gap at the bottom or pointy end of the main body in order to get the arms out when you turn/flip everything inside out. You will sew it up later.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
