i used photoshop elements to create the net for the model and to colour it and add details, overall this took me about a day to design but it will only take you about 5-10 minutes to make
I hope you enjoy it !
Step 1: Equipment + Tools
-- 1 Paperclip
-- Glue (any kind)
-- Scissors / Craft knife
-- A Printer
-- One sheet of paper
Step 2: Printing the Net
you can download it below, There are two options, you can either download the yellow and orange robot or a blank template so you can colour it in yourself !
when you click print make sure you check the "center image" box and don't check the scale to fit box or the image will become distorted.
Step 3: Cutting Out
Be careful on this step and go slow, its very annoying when you cut the wrong bit and have to start again !!
When you are cutting out the legs don't cut around the wheel or Robot will fall over, look at the 2nd pic and cut it out like i did.
Step 4: Folding the Net
Once you have folded all the edges and tabs, try to hold it all in place and make sure that you have folded all the bits you need to. (look at 2nd pic)