Print PDF
Favorite
Email
Step 3Cutting Out
Now you have printed your net you need to cut it out. The grey bits around the edge of the net are the tabs, don't cut them off !!
Be careful on this step and go slow, its very annoying when you cut the wrong bit and have to start again !!
When you are cutting out the legs don't cut around the wheel or Robot will fall over, look at the 2nd pic and cut it out like i did.
Be careful on this step and go slow, its very annoying when you cut the wrong bit and have to start again !!
When you are cutting out the legs don't cut around the wheel or Robot will fall over, look at the 2nd pic and cut it out like i did.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
