Print PDF
Favorite
Email
Step 3Wiring the Pads
Cut your wires.
Since our interface was going to be on the floor, and in a punching bag, we made the wires approximately 1m long ( so we bought 25m of 0.5mm wire just in case).
Strip the tips of the wires on either end.
Attach one end of each wire to the pad by fastening it underneath another portion of metallic tape.
Since our interface was going to be on the floor, and in a punching bag, we made the wires approximately 1m long ( so we bought 25m of 0.5mm wire just in case).
Strip the tips of the wires on either end.
Attach one end of each wire to the pad by fastening it underneath another portion of metallic tape.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
