Step 3Unlocking Evo Flash
Click on Start >Programs> write Filter and this should start the Write filter Device Control
Click on Flush cache and after a few seconds the NTE Flash memory Write filter will turn off click on close and should now be able to delete and change things permanently
However every time the unit restarts the Memory Write lock will re-engage (It can be turned off but is best left like this as it this does give protection against accidental deletions )
Take this opertunity to delete a few dirrectories to create space for usefull stuff specific dirrectories that can go are Adobe Rapport etc but Leave Windows Media Player / Common files / Internet Explorer/ Windows Media Player / and Orl intact [The Orl dirrectory includes files that permit remoting into the unit over the network]
To do this may need to stop some services through control Panel - I will clarify this in another instructable later .
On XPe units in Administration mode a different Write filter of the same name is used with the Xpe version once the Write lock is turned off it stays turned off untill you turn it back on again even when you reboot.
| « Previous Step | Download PDFView All Steps | Next Step » |
![]() |
Add Comment
|












































