Print PDF
Favorite
Email
Step 9Interface cables
The intervalometer plug is wired for direct connection to a Canon Rebel series camera. It has a standard E3 connector (2.5mm plug).
In order to connect to other cameras, you'll need to make a cable that converts from the E3 plug to whatever plug your camera uses. I've been most successful doing this by purchasing simple remote switches for other cameras, chopping off the switch part, and adding a 2.5mm socket to the end - so that it can be plugged into the intervalometer.
Below are some pictures of the various cables I've built.
www.amazon.com/dp/B002V63TC2 Canon E3 to Canon N3 cable
www.amazon.com/dp/B002V641LK Canon E3 to Nikon D80/D90 cable
www.amazon.com/dp/B002V6BET2 Canon E3 to Nikon D700/D300 cable
In order to connect to other cameras, you'll need to make a cable that converts from the E3 plug to whatever plug your camera uses. I've been most successful doing this by purchasing simple remote switches for other cameras, chopping off the switch part, and adding a 2.5mm socket to the end - so that it can be plugged into the intervalometer.
Below are some pictures of the various cables I've built.
www.amazon.com/dp/B002V63TC2 Canon E3 to Canon N3 cable
www.amazon.com/dp/B002V641LK Canon E3 to Nikon D80/D90 cable
www.amazon.com/dp/B002V6BET2 Canon E3 to Nikon D700/D300 cable
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
