Introduction: Introduction

Picture of Introduction

The following information is a single lesson in a larger project. Find more great projects here.

Project Overview:

In this project, you will become familiar with the toolbox that comes with the Arduino Basic Kit. The concepts covered include basic breadboard skills, and switches in series and parallel, and Ohm's Law.

Step 1: Project Description

Picture of Project Description

In this project you will become familiar with part of the Arduino toolbox, including breadboards, LEDs, resistors, and buttons.

At the end of the project, you will also learn about the fundamental concepts of resistance, current and voltage, and about Ohm's Law, which defines the relationship between all three.

  1. Continue to the next step.

Step 2: Bill of Materials

Picture of Bill of Materials

You will need the following electrical components for this project:


2 pushbuttons

1 220 ohm resistor ...and of course your Arduino Uno and a breadboard!

  1. Continue to the next lesson to start learning about circuits!

Next Lesson:Getting Started with Electricity


About This Instructable




Bio: Learn electronics and Arduino with Tinkercad Circuits!
More by circuits:IntroductionProject 15: Hacking ButtonsProject 14: Tweak the Arduino Logo
Add instructable to: