Introduction: Intruder Alarm With PIR Sensor With Mediatek Linkit One Board

Picture of Intruder Alarm With PIR Sensor With Mediatek Linkit One Board

Theft !!Theft!! Theft!!!

Here is the Solution. In This Instructable You will be able to make Intruder alarm for Your Home With PIR interfaced with Mediatek Linkitone Board.As soon as the Burglar Enters Your House In The night .... the alarm will raise!!!!!

Step 1: What U Need

Picture of What U Need

  • PIR Sensor
  • Buzzer
  • Mediatek LinkIt One Board
  • Connecting Wires
  • USB cable

Step 2: Connections

PIR Sensor

  • Vcc: 5V on Board
  • GND:Gnd
  • Out: D2 on Board
  • Buzzer Red Wire: D10 On Board
  • Buzzer Black Wire: Gnd

Step 3: Code,Compile and Run

Picture of Code,Compile and Run

Upload The Code And You are Ready To Go!!!!! Your Intruder Theft Alarm is Ready!!!!


Thanks for Watching It!!!

Comments

DIY Hacks and How Tos (author)2015-12-17

Nice DIY security system.

About This Instructable

101views

0favorites

License:

More by Got007:Accelerometer Interfacing With Mediatek Linkit One  BoardFamous LM35 With Mediatek Linkit One BoardInterfacing Proximity Sensor With Mediatek Linkit One Board
Add instructable to: