Print PDF
Favorite
Email
Step 4Inside the usb , with connections
Here is my work .
The adapter was soldered to the USB socket pins with the specified two resistors of size of 150K ohm,
You may try to see if you can get it work with looser wires , after working stage , you can always do the wires shorter , and make the necessary cosmetic changes :)
Please notice, wires must not short-circuit if they are not insulated.
The adapter was soldered to the USB socket pins with the specified two resistors of size of 150K ohm,
You may try to see if you can get it work with looser wires , after working stage , you can always do the wires shorter , and make the necessary cosmetic changes :)
Please notice, wires must not short-circuit if they are not insulated.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
