Iron Man Mark 7 Portable Hand-mounted Auto-attatched Repulsor/Coilgun/Tazer

Hello everyone in this  instructable i'll show you the process of hoe to make a repulsor out of a camera flash , some pulse switches , magnet wire and a couple of more things. While i was trying to do this i made 3 repulsor , one made of plastic ( doesn't turned out really well) , one mde of foam and resin ( this was my favourite for it's resistant materials) and the thrird and the one that i'm going to show you it one made entirely of a composed material half foam half plastic reforce. 
The first thig to do is to get a camera with a flash in it a dissasembly carfully the whole thingh ( be carefull to discharge the capacitor ). For this part i'm no going to be very detailed because here in instructables there are lots of step by step instructables showing how to make it, for that reason i''l just leave you a circuit diagram to guide you over the process. The next part is to attatch a coil gun like the diagram , the pulse switch for the flash or tazer (it;s up to you ) , and the power supply .
Next i downloaded and printed the pdo files of the mark 7 forearms , handplate , right hand .once done that i cutted the foam out of the parts printed and superglued them together. once everything is done i gave them 3 layers of vinilyc paint , this reforces the whole structure.
For the fingers i printed them into a 120 gr paper so it can be rigid and at the same time light enough.Once everything was done y painted everything in red silver and gold paint (for the details) , and installed the electronics. Glueing some magnets in the wirst and in the forearm lets the armour to be portable ,and it will also attatch to my wirst because of my magnetic bracellet (just some inexpensive bracellet with a couple of orientated magnets in it ).
The final step is to test it up and have fun ,i also made a replica of the arc reactor, this is all for now see you next time.