Isobaric Subwoofer

Step 4 Gasket

I want this lid to be removable for the purposes of tuning the enclosure, so there needs to be some kind of airtight seal where the lid meets the box, my plan was to route out a semicircular groove using the router and then apply bathroom silicone to the groove to form a gasket - I had no idea how well this was going to work out!!

Comments

[Koil_1]

...That's not to mention being able to get into the cabinet to replace a blown or damaged driver... This is seriously important because if you can't replace the driver you gotta rebuild the whole project. Having worked in this field I've seen how hard it is to open one of these boxes after it's been completely sealed. It's difficult at best and usually renders the project as scrap due to breakage of the building material.

[toastyboy]

Yeah, but you can see why they do it. Making the gasket and getting a good seal was very time consuming. I'm glad I did it though. Cheers for your comments