Isobaric Subwoofer

Step 5 Drivers

The speaker wires come through the baffle and then pop out near to the driver connection tags, the picture below shows the wires connected up. I soldered them to the speaker tags as this is more reliable than crimping connectors on, as always a couple of cable ties and P clips help hold the wire in place, I've also used cable ties to show which wires are +ve and which are -ve.

Comments

[TEXACA]

NICE POST toastyboy... btw, are the drivers wired OUT-of-phased, or In-phase..... Just curious.. -Alfredo

[toastyboy]

They are wired out of phase so that they move in the same direction. Cheers -Dan