loading

Step 4: 4. Add a closing gasket to the back end of the faucet

Picture of 4. Add a closing gasket to the back end of the faucet
Once your faucet is glued in to the bin and secure add a rubber gasket to the back end of the pipe. Make sure it's secure, adding more glue if necessary. Fill the bin with water pass the pipe and let it sit overnight. If there is no leaks then proceed to step 5.
 
Remove these adsRemove these ads by Signing Up
manicmonday2 months ago

As a plumber I would recommend 100% silicone caulking. Put it on both sides and let it dry thoroughly. You will need to provide support until the silicone can cure. Once it cures it's very strong and water tight.