Instructables

J5 Barricade Shotgun

Step 3: Pump

Picture of Pump
P1040119.JPG
P1040121.JPG
P1040124.JPG
P1040131.JPG
P1040132.JPG
Build the pump. This is a version of the pump used on the OSNJCKMA2, pretty much the greatest gun ever

Pictures:

1. Pump segment
2. Put 8 segments on, spaced with gray connectors
3. Rear of the pump. Pushes the ram rod back
4. Attach the rear of the pump
5. Front of the pump. The ball joint is where the rubber band attaches
6. Sliders. The pump slide goes thru here
 
Remove these adsRemove these ads by Signing Up
ramen433 years ago
nice