JDM2 based PIC Programmer

Step 3 USE

The programmer will work with any programming software that supports the JDM2. I like WinPic800 (LINK:http://perso.wanadoo.es/siscobf/winpic800.htm ), and WinPIC also deserves credit for the great technical support info (LINK:http://www.qsl.net/dl4yhf/winpic/ ). Both support the newest USB PICs (18F2/4455). ICProg is great, but has not been updated in some time (LINK:http://www.ic-prog.com/ ).

This programmer has been tested with the following PICs:
Pins Part #
8 12F683
14 16F684
18 16F84(a)*, 16F628(a)*
28 16F737, 18F2455
40 16F74, 18F4455
*Original and 'A' revision OK.

Placement for various PICs is show in the diagram below. It is not limited to these PICs - it should work with any PIC that has Vpp, Vss, Vdd, PGD, & PGC arrangements as shown.

Comments

[viswanathmarachi]

Hey,

Thanks for the simple design... Can I program attiny2313 which is a 20 pin IC with this programmer??

Thanks...

[ian]

I think only PICs.

[noxx]

Ian I can't open the files that have .brd and .sch extensions. which application do i use to open to them?

[ian]

Cadsoft Eagle.

[anatesan]

can we program pic18f4550 and pic18f2550 using this

[mujtaba ali]

hey,
is it program to 16f877a microcontroller ic?plz reply

Thanks.....

[ian]

should be ok