Print PDF
Favorite
Email
Step 4Deflating and shaping
There you have it, you are done with the messy stuff!
Once you have done the paper mache layers, deflate the ball.
To do this you will simply, from the neck hole cut a large gash in the ball.
Let the ball deflate and pull out the deflated the ball through the neck hole.
Be very careful when pulling out the ball... There is a very low possibility that the mache mold will cave in, but that will only happen if you didn't follow my directions so far!
The mold could be a little delicate once you pull out the ball, so don't start throwing it around.
Once you have done the paper mache layers, deflate the ball.
To do this you will simply, from the neck hole cut a large gash in the ball.
Let the ball deflate and pull out the deflated the ball through the neck hole.
Be very careful when pulling out the ball... There is a very low possibility that the mache mold will cave in, but that will only happen if you didn't follow my directions so far!
The mold could be a little delicate once you pull out the ball, so don't start throwing it around.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
