Introduction: Jackal V2

Well, this is my second attempt at an assault pistol. It kinda looks like a combo of shadowninja/IAC AP. This one uses removable mags. Shoots green rods

Pros

- true trigger
- removable mags (expandable)
-30-40 foot range
- looks tight
- you can also muzzle load this gun if you run out of mag ammo or want to shoot larger rods.

CONS

- looks like shadowninja's AP and teh SPIFF combined.

Credit goes to s0lekill3r for the base design (The old version used his removable mag, but i made a new system after experiencing problems with his system).

WANT MORE? SUBSCRIBE!

Step 1: Build These Misc. Parts

These are just parts. Image notes will give you a description of each part and its function. Set them aside for later.

Step 2: Handle

This is the AP handle. Build it.

1. The 2 frames, one has all orange connectors, blue rods, and spacers on it.

2. the complete handle.

3. Add 2 of the misc. parts from step 1 to the handle.

Step 3: Trigger

This is the true trigger.

Picture 1- build it

Picture 2- add to handle

Step 4: Barrel/Mag Area

This is 3 pictures. Sorry that I couldnt be more detailed, but i didnt have a lot of time to take pics.

1- side view

2- looking at it from the bottom

3- add the mag holder you made in step 1

Step 5: Magazine

This is the magazine.

Picture 1- mag pusher

Picture 2- mag pusher holder/lock for when mag is inserted.

Picture 3- top part of mag.

Step 6: Final Assembly

Connect the barrel to the handle

1- connect barrel to handle

2- put the last part you made in step 1 on the gun.

Step 7: Loading and Firing

Picture 1- make the firing pin

Picture 2- Rubberbands for trigger and pin

picture 3- mag insertion

Have fun!

Step 8: Troubleshooting

Q- mag falls out and ammo spills throughout the internals
a1- you put the mag in wrong
a2- you built the mag wrong
a3- your y connector may be faulty

Q- ram gets stuck over the ammo
a- twist the ram somewhat.

Q- ammo does not go over 10 feet
a- this is a common problem. it has to do with the ammo under the current round.

Comments

author
Drakencas made it! (author)2012-04-18

can you make a better picture of the trigger?

author
mahmel made it! (author)2010-10-23

It doesn't look very realistic.

author
DJ Radio made it! (author)DJ Radio2010-10-24

Does it matter if it does or not? Where the hell did I say It's supposed to look realistic?

author
mahmel made it! (author)mahmel2010-10-25

I think a more realistic gun is better, about looks. There are loads of removbale magazine pistols which look better.

And I didn't mean to hurt you or something :)
But it looks so chaotic ....

author
DJ Radio made it! (author)DJ Radio2010-10-25

I really dont care. I think there should be function before form.

author
mahmel made it! (author)mahmel2010-10-26

Ever heard of constructive criticism?

author
DJ Radio made it! (author)DJ Radio2011-07-14

A comment about how realistic a knex gun is isn't valid unless it's a replica, which this isn't.

author
mahmel made it! (author)mahmel2011-07-14

Well forget about the comments, ohwait you do because you said you dont care:)
No anyway it was ages ago when I posted that comments, anyhoww I don't care about this gun. I just don't like it. Especially how it looks.

author
stopanator made it! (author)2010-06-12

aww cant make cuz the top of the mag i cant see it

author
DJ Radio made it! (author)2009-11-15

Coming soon:

Jackal 4 001.JPG
author
Llamaboy419 made it! (author)2009-10-27

It would be greatly appreciated if you could post a picture of the inner layer. I'm not quite seeing the end bits at either side in the first picture.

author
DJ Radio made it! (author)DJ Radio2009-11-06

I'd rather not bother with this pistol.  The invention of oodammo makes this obsolete.

author
Llamaboy419 made it! (author)Llamaboy4192009-11-08

I don't like Oodammo, to be honest. But I got this gun working. HOWEVER! I got bored. So I took out the entire magazine system, reversed the inner layer so the firing chamber would be accessible from the top, and made a rifle out of it. it fires yellow rods manually, or a small 4 round blue rod mag. I also added a semi collapsible stock and extended the barrel. Shoots approx. 50 ft with my barrage of thick rubberbands. It's pretty accurate too. I don't feel like posting a picture. Sorry. Haha.

author
DJ Radio made it! (author)DJ Radio2009-11-08

You should get one up. Why don't you like oodammo?  It's very accurate and stable.

author
shadowninja31 made it! (author)2009-04-13

Hi cool gun

author
DJ Radio made it! (author)DJ Radio2009-04-13

rate?

author
shadowninja31 made it! (author)shadowninja312009-04-14

above average i guess cuz most guns nowadays are not super as they were half a year ago when everyone was here

author
DJ Radio made it! (author)DJ Radio2009-04-14

You know that almost everything posted here is better than the guns from 2-3 years ago.

author
shadowninja31 made it! (author)shadowninja312009-04-14

yes, but guns from half a year ago are starting to be better than guns from now as lots of the knexperts seem to have left although we do have a few remaining...

author
DJ Radio made it! (author)DJ Radio2009-04-14

nah, i think there were only 2 or 3 guns that were as good or better than today

author
shadowninja31 made it! (author)shadowninja312009-04-15

really? 6 months ago was summer or fall, (wow that was fast...) and during then was a faze of tons of guns, some of the best were built then, and IMPROVED on by now, so the improved v.2's don't seem as monumental (and half the time as good). So if mepain built a knexsayer v.2 it wouldn't be as popular, though he might have fixed something. I still think it was around then though.

author
An Villain made it! (author)An Villain2009-07-18

a knexsayer V2 should have a less complex mechanism so it will not get messed up as much, and maybe a bigger turret.

author
DJ Radio made it! (author)DJ Radio2009-07-19

the original knexsayer had a relatively simple mech, the bulk on the gun just makes it look complicated.

author

i tried makeing it have 18 barrels but the rotaor and pump would need mods

author
DJ Radio made it! (author)DJ Radio2009-08-12

You should make the rotation mech killerk's, and the pump should just pull the pin back.

author

i put the br36 on the k sayer and it was beast but it used the rb to rotate and ooda didnt thin it was as cool as before

author
DJ Radio made it! (author)DJ Radio2009-08-13

pics?

author

sure come on aim and ill show you and give you more info in me new project

author
DJ Radio made it! (author)DJ Radio2009-08-13

Just PM me the project, or go to instructables chat.

author

im in one of the pics sooooooooo yeh im keeping it private

author
DJ Radio made it! (author)DJ Radio2009-09-06

Private messages....

author
Fred the Penguin made it! (author)Fred the Penguin2009-10-02

Here it is, the one picture isn't much but it gives a good idea of the gun, a few stats, length, 22 yellow connectors, ammo, anything you can stick in a slingshot gun

DSC02536.JPG
author
DJ Radio made it! (author)DJ Radio2009-10-03

Just another slingshot. =P

author
Fred the Penguin made it! (author)Fred the Penguin2009-10-03

yes but it is a part conservitive slingshot, I have a video on the forum now, watch it to see it in action

author
DJ Radio made it! (author)DJ Radio2009-10-03

I can see yellow connectors all over, part conservative guns are guns that I build. The OSSR is a true part conserver.

author
Fred the Penguin made it! (author)Fred the Penguin2009-10-03

mine uses 54 yellow connectors, 6 in the back handle 4 in the front then 44 more for the two rails, you can build it as long as you like, it uses fewer yellow connectors than the sipriani v3 but is as long as the entire sipriani even without a stock, it is in fact very conservitive for a rail gun, or even most types of slingshots

author
DJ Radio made it! (author)DJ Radio2009-10-03

OSSR uses less yellows, I cheat and use gray 3d connectors often.

author
Fred the Penguin made it! (author)Fred the Penguin2009-10-03

I believe the range of the ossr is 27+ meters, pretty good, I get over 100 meters firing flat with the mark 1 using oodammo

author
DJ Radio made it! (author)DJ Radio2009-10-04

The OSSR I posted has a short barrel. Shorter than your gun I think

author

can you send pics through that

author

can you send pics through that

author
shadowninja31 made it! (author)shadowninja312009-08-13

ooh.... can i see???

author

come on aim and then yes

author
shadowninja31 made it! (author)shadowninja312009-08-14

oh i doesn't use aim...

author

if dj responds to my comment then yes

author
Bartboy made it! (author)2009-09-06

This sucks. The mag is horrible, and it doesn't work. At all. The handle is tiny. But, the trigger is good, and I made the handle bigger. I also built a new mag that actually works. It fires yellow rods... And can be loaded very fast.

author
KnexFreek made it! (author)KnexFreek2009-09-24

the handle is small....

author
Bartboy made it! (author)Bartboy2009-09-24

Just add another section to it.

author
KnexFreek made it! (author)KnexFreek2009-09-24

i already did when i made that comment i meant dj should add the extension to his ible

author
DJ Radio made it! (author)DJ Radio2009-09-26

I thought the handle was the perfect size. Not too big and not too small.

About This Instructable

1,702views

8favorites

License:

Bio: OFWGKTADGAF
More by DJ Radio:GKTP (I'm back?)Blast from the past:  Knex EZM (Experimental ZKAR mod)The "Super bullet"- Possibly the fastest paper airplane ever?
Add instructable to: