Introduction: Jackal V2
Well, this is my second attempt at an assault pistol. It kinda looks like a combo of shadowninja/IAC AP. This one uses removable mags. Shoots green rods
Pros
- true trigger- removable mags (expandable)
-30-40 foot range
- looks tight
- you can also muzzle load this gun if you run out of mag ammo or want to shoot larger rods.
CONS
- looks like shadowninja's AP and teh SPIFF combined.Credit goes to s0lekill3r for the base design (The old version used his removable mag, but i made a new system after experiencing problems with his system).
WANT MORE? SUBSCRIBE!
Step 1: Build These Misc. Parts
These are just parts. Image notes will give you a description of each part and its function. Set them aside for later.
Step 2: Handle
This is the AP handle. Build it.
1. The 2 frames, one has all orange connectors, blue rods, and spacers on it.
2. the complete handle.
3. Add 2 of the misc. parts from step 1 to the handle.
Step 3: Trigger
This is the true trigger.
Picture 1- build it
Picture 2- add to handle
Step 4: Barrel/Mag Area
This is 3 pictures. Sorry that I couldnt be more detailed, but i didnt have a lot of time to take pics.
1- side view
2- looking at it from the bottom
3- add the mag holder you made in step 1
Step 5: Magazine
This is the magazine.
Picture 1- mag pusher
Picture 2- mag pusher holder/lock for when mag is inserted.
Picture 3- top part of mag.
Step 6: Final Assembly
Connect the barrel to the handle
1- connect barrel to handle
2- put the last part you made in step 1 on the gun.
Step 7: Loading and Firing
Picture 1- make the firing pin
Picture 2- Rubberbands for trigger and pin
picture 3- mag insertion
Have fun!
Step 8: Troubleshooting
Q- mag falls out and ammo spills throughout the internals
a1- you put the mag in wrong
a2- you built the mag wrong
a3- your y connector may be faulty
Q- ram gets stuck over the ammo
a- twist the ram somewhat.
Q- ammo does not go over 10 feet
a- this is a common problem. it has to do with the ammo under the current round.