Print PDF
Favorite
Email
Step 7Assemble
Re-assemble the batten lampholder.
Sandwich the jar lid between it and the base.
Thread the cable through the centre hole and out the routed channel.
Screw the lampholder into the base.
Wire up the other end of the cable to the 240v plug and you're done.
Sandwich the jar lid between it and the base.
Thread the cable through the centre hole and out the routed channel.
Screw the lampholder into the base.
Wire up the other end of the cable to the 240v plug and you're done.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
