Print PDF
Favorite
Email
Step 4Cut the Wallet Pieces
You need:
One piece for the outside of the wallet. This one is approximately 8 3/4 inches wide by 3 1/4 inches high.
One piece for the inside of the billfold. It needs to be shorter (less wide) than the outside piece. How much shorter will determine how much you can stuff in the wallet and still get it to close. This one is 1/2 inch less than the outside piece (or 8 1/4 inches). Keep in mind that the denim will likely stretch over time.
Depending on the overall length of the cuffs after being cut open, you will likely get the inside piece from one cuff and the outside piece from the other cuff. I recommend not centering either piece over lapped seam. It makes the wallet less able to fold flat.
The pieces remaining after cutting the inside and outside pieces will be used for pockets.
One piece for the outside of the wallet. This one is approximately 8 3/4 inches wide by 3 1/4 inches high.
One piece for the inside of the billfold. It needs to be shorter (less wide) than the outside piece. How much shorter will determine how much you can stuff in the wallet and still get it to close. This one is 1/2 inch less than the outside piece (or 8 1/4 inches). Keep in mind that the denim will likely stretch over time.
Depending on the overall length of the cuffs after being cut open, you will likely get the inside piece from one cuff and the outside piece from the other cuff. I recommend not centering either piece over lapped seam. It makes the wallet less able to fold flat.
The pieces remaining after cutting the inside and outside pieces will be used for pockets.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
