Jeans Cuff Wallet

Step 5 Figuring Out Pockets

In this wallet design, both inside left and right sides have two vertical pockets. Fold one of the two remaining pieces over a credit card or similarly sized card. The edge of the fabric behind the card should be flush with the edge of the card. The edge of the fabric in front of the card should be about 1/2 inch or so below the edge of the card.

Note the length measurement for the section behind the card. Unfold the fabric and mark the length for the piece behind the fabric. Measure out from that mark the length, minus 1/2 inch and mark. Draw lines the width of the fabric at each mark. Cut the fabric along those two lines.

Using the same measurements, measure, mark, and cut the other remaining piece of fabric.