In this set, The Joker is chasing down Batman in Harley Quinn's Hammer Truck. Use Batman's Utility Belt to bring the Batmobile into action.

Step 1: Build 1st Wheel Base

Take 5 black 2x4 pieces. Put 2 pieces parallel to each other with space for another 2x4 in between. Place another 2x4 piece on top of one of the other 2x4's. Take the remaining 2 2x4's and place them on top of the second 2x4, perpendicular creating a "bridge" that isn't connected. Add 2x2 missile launchers. Add an black axle piece between, connecting the two sections. Add wheels.

Step 2: Build 2nd Wheel Base

Take 5 red 2x4 pieces. Put 2 pieces parallel to each other with space for another 2x4 in between. Place another 2x4 piece on top of one of the other 2x4's. Take the remaining 2 2x4's and place them on top of the second 2x4, perpendicular creating a "bridge" that isn't connected. Add 2x2 missile launchers. Add an black axle piece between, connecting the two sections. Add wheels.

Step 3: Weapon Vault

1 Harley Quinn Hammer

Take Black Stick piece and attach 1x1 red cone piece to top. Add 1x1 red cross axle piece. add 1x1 black cone piece. Add 1x1 5stud piece on black cone. Take 3 gray 1x1 circles and add onto 5 stud piece. Take 2 black cylinder pieces and add onto 5 stud piece.

2 Vault

Step 4: Driver Base

Take a black 6x10 plate. put a red 4x4 plate at the bottom middle . put a red 4x6 plate at the top middle. put a gray engine at the top middle. Take a black 2x1plate. put a red steering wheel on plate. put behind engine. put gray slanted piece 2 studs away. get 4 2x1 plates put 2 on each side. put long red slanted pieces on them.