Introduction: Junk Robot Sculpture
This walk-through will show you how to build a sculpture like the one in the picture.
Step 1: The Stuff You'll Need
A couple of 1 Gal. milk cartons
Some cardboard or foamboard, I used foamboard but you should just use whatever you have
A knife and scissors
A hot glue gun
Anything else you'll use like wire or aluminum foil
Step 2: Cutting the Milk Cartons
Use a knife or scissors to cut the milk cartons in the way shown in the pictures. A little deviation from what is shown is fine. Do it how you want it.
Step 3: Cutting the Foamboard
Cut the foamboard/cardboard as shown in the pictures.
Step 4: Gluing It Together
Glue the stuff together like the pictures show.
Step 5: Paint the Darn Thing Already!
I just used spray paint.
We have a be nice policy.
Please be positive and constructive.