Introduction: Junk Art That's Not Junk

Picture of Junk Art That's Not Junk

  Hi, I'm Zack, and this instructables is about turning junk into art. So basically what I did is solder and glue stuff together to look cool. You don't have to do exactly what I did, you can do what ever you want. Here we go!

Step 1: Tools

You will need:
A soldering iron
A grinder
Hot glue
Super glue
Junk
The ability to solder without burning yourself.  (I don't have this skill, Ow!)

Step 2: The Body

Picture of The Body

When you are super gluing, DO NOT glue your fingers to each other as it puts you in a 'sticky' situation.

Step 3: The Right Arm

Picture of The Right Arm

Don't over tighten the bolt on the terminal block connectors.

Step 4: The Left Arm

Picture of The Left Arm

Every thing I say here will make complete sense.

Step 5: The Head

Picture of The Head

Refrigerator.

Step 6: The Battery

Picture of The Battery

Use an SPDT button for the circuit that lights up the eyes.

Step 7: The Finishing Toches

Picture of The Finishing Toches

Tomato.

Step 8: Fineshed

So you've seen what I built.  Now what will you build?  Be creative, make a small one, make a big one, control one with an Arduino, make one fly or send one under water.  Have fun!!

P.S. I am interested to see what you build.

Comments

zack195610 (author)2013-06-07

It's a joke. Look at step 4.

Ok. Makes sense [or not ;)] now.

StandingOnStones (author)2013-06-06

Tomato?

About This Instructable

1,324views

5favorites

License:

More by zack195610:MegaminxLego "Puzzle" PuzzleHow to "balance" on a ladder
Add instructable to: