Introduction: Just a Tree.... for Decoration

Easy and simple project for Christmas or just for decoration.....

Step 1: What You Need....

Picture of What You Need....

1. Pieces of off cuts or pallet wood.

2. A pallet block

3. Nailgun

4. Wood glue

5. A miter saw

6. A sled with an angle ....

7. A lot of twigs or small logs

Put the sled on the miter saw. And cut the angles you need.

Step 2: Lets Make a Tree

Picture of Lets Make a Tree

Make an triangle of the boards.

Glue and nail everything together.

Put the pallet block under the traigle and nail it to the board.

Step 3: Cut the Branches and Twigs

Picture of Cut the Branches and Twigs

Cut all the branches and twigs in to lenghts.

And place the branches in to the triangle.

And your tree is done......

If you need more instructions ..watch the video

Hope you injoy this project.

For more Christmas projects:

https://www.instructables.com/id/A-Pallet-Christmas...

https://www.instructables.com/id/Christmas-Snowball...

Comments

celt81 (author)2015-12-10

Great project, just what I've been looking for :)

hboom (author)celt812015-12-10

Thanks for watching

About This Instructable

472views

14favorites

License:

Bio: https://www.youtube.com/user/houtjeboom/videos http://https://www.facebook.com/houtje.boom
More by hboom:Stir Fried Seaweed Carved Garlic HolderChristmas Stamps
Add instructable to: