With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
During a recent craft store visit to Michaels, I came upon an amazing discovery...giant diecut 12x12 scrapbook pages in laser cut numbers, letters, an...
Before you begin: Wash fabric to remove sizing. Also, prepare your work area for spraying. Use a large table or outdoor area. Using fabric marking pe...
Cut around traced lines with scissors.
Lay diecut on top of fabric.
Using Fabric Spray Paints, spritz and spray over top of diecut as desired. The more you spray, the darker the areas will become. Pressing pump halfway...
Your finished design will look something like this. Spray on fabric as desired. For best results, let fabric sit for 72 hours before you wash it. I pe...
7. Iron both pieces of fabric Next, flip the two pieces inside out and pin together around edges.
Sew around edge of pillow. I used a zigzag stitch, but it may have been better to do a straight stitch.
Leave an opening of about 2 inches. Now turn the pillow right side out.
Stuff the pillow using fiber fill and shape as you go.
Using needle and thread sew up opening and you are finished!
Here's the other side of the pillow. It has a more concentrated spray look. Also I laid the diecut down again and sprayed and it created a slightly of...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »