With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
CR-WR77RA Special Rifle Design Featuring Rapid-fire Capability Type: Rifle(AST) Weight: ~500 grams Ammo Type: 13 centimeter Red Rod Range: 10 meters Firing Interval: 1 second Mag Capacity: 17 ...
Connectors - 20 White - 31 Yellow - 11 Green - 6 Red - 20 Orange - 3 Light Grey - 13 Grey End Connectors - 8 Brown ...
This shows the side of the gun without the center layer, which is the next step. Do not start building this layer, but use this as a reference ...
Begin building this center layer. This is the lower portion of the gun barrel. If you plan on using this gun for a long time, you may want ...
This diagram shows the position of the three layers. Do not start building the layer from Step 2 yet.
So you probably figured out why I suggested not building the side layers. Now you can easily attach the connectors from the side layers to the white rods.
See notes for construction details.
Top view of trigger once attached to frame. Note the brown hubcap connectors used to secure the ends of the blue rods.
Once you have completed the upper portion, begin construction of the bottom of the trigger. Put a blue rod through the greys that are attached. By now, the ...
Attach this unit to the blue rod space from previous step.
Attach the unit built in Step 9 to the space on the blue rod in Step 8.
Attach the rubber band, brown hub cap connectors in front of the magazine, and firing mode toggle. The toggle consists of an orange connector with blue rod. Grey ...
Use The grey and brown connector under the trigger serve as the firing mode toggle (must point down). 1. When both are pulled back, the trigger will not ...
Make An SL9 Assualt Rifle Using K'nexby Mintyhippo
i am canadian's AST Pistol Modby silencekilla
k'nex assault rifle improved!!!by griffers93
SCAST v1.4 (K'nex AST Rifle)by jollex
Moded "Gorkems sniper rifle"by Jarez Patel
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.