Picture of K-TON Palm Flamethrower
This is a new version of a wrist mounted flamethrower I made this summer. It is similar some others  flamethrower seen on youtube but they all seem to have complex electrical systems. I wanted to do something much more simple. The gas flow control is entirely mechanical. The only electrical component is the ignition system powered with a single AA battery.


1-40 of 63Next »
How did you over come the condensation problem, aka fuel spitting?
yassineo2 months ago

that is amazing :D

JadenS11 months ago

So is there any place we can buy these?

Post an ible

if you cant can you see if you can sell them

please send me a list of parts and a blue print

ebolson1 year ago
Make how-to
mike hussy2 years ago
i really like it as i am a indian i ma telling you that i want to make a K-TON wrist held flamethrower .so i need an blueprint to make it so , accept my request.And make sure you must send a email to id.

Yea, give us a blueprint for one of these, except on Instructables.

pk_raine2 years ago
I'd pay 80-100$ for one
16lundgcodm2 years ago
Sometimes you just have to let stupid flow, from your palms, on fire, and it becomes amazing.
budhaztm2 years ago
nice. You should do a step by step for this.
waleter2 years ago
can you please post a how to vid or steps
waleter2 years ago
how do i make this
i feel sorry for the guy who come up to you in an alleyway and pulls a knife


Two words come to mind then Crispy Creme
geekzerone3 years ago
I recently made a basic stick mounted flame thrower to use to light a bonfire I was put in charge of. I had three days to design and make it, and it went off without a hitch. I now have until July to try to make one of these to top what I did at the bonfire. Between now and then is another bonfire where I will have a better designed flamethrower, but I want to have a couple of wrist mounted ones to be to surprise everyone with a burst of flames from my hands to use to light the fire. Is there any chance you can help me out with a design for a wrist mounted like this? My main issue with designs so far come in with nozzles and fuel control. I'm asking around for help. Any thing you can to help would be much appreciated.
could u please post the instructions on here or post them on a website of another
That is so cool.
You should make a device for the other hand that focuses on shooting fuel, so you could use your right for distance and aiming and the left to ignite it.
DiyAllDay3 years ago
How did you regulate the butane flow if its a valve whats it called? And also how do you keep the butane from condensing inside the tubes?
39otto3 years ago
Could you please post the blue prints or any kind of instructions, please.
Also its perfectly legal
how did you make the ignition system ?
willshubert3 years ago
hey i'm in the process of drawing blueprints for my own device and i wanted to also do a purely mechanical device, do you think you can email me on how the valve system works to regulate the gas i would really appreciate it.
thank you
dczupik3 years ago
Hey, i was wondering if you could tell me how to make a valve for a mini butane canister. im modifying a toy gun i have to be a flamethrower. i already have an idea for the ignition source, but im lost on how to actually release the gas strong enough to make a decent sized flame, your help would very appreciated,
pyromanic3 years ago
tell us where to buy it I need it
I think the best part about the entire system is that it doesn't look all mechanic and iron man that takes months of time to produce bravo great job

If you wouldn't mind I ask how much money would it cost to produce this system and how long
Valencio (author)  adam97nguyen4 years ago
Development Time: 1 month
Building (after the development): 2-3 hours
Cost: Definitely less than 60 bucks
I love your device, where can i buy it?
Thanks for the information I know that there are federal laws against this kind of thing so I'm pretty sure you won't be making a building instruction for a while and I am very interested in this cool gadget and would love to have one for the next fourth of July and was wondering if you could maybe on your own time possibly inbox the instruct able to me I would really appreciate it

kewlbanana3 years ago
Destruction increased to 26!
Only thing I'm wondering about is how to do the mechanical cutoff...
Very cool! I'd be happy to send you a badge and feature an ible if you could get one up. :p
armor-guy3 years ago
please! please! please! make an instructable so we can make are own!

p.s.or at least tell us were to buy them.
Adum243 years ago
Hey quick question. Would you mind if i made my own and made an instructable? I wouldnt copy your design exactly, but at least try to make instructions others could follow, so they can make their own
mstyle1834 years ago
wow thats insane!! i want one
Valencio (author)  mstyle1834 years ago
Thanks! I have been requested to sell them, I still don't know if I will, I don't even know if it is legal or if it can get through the customs.
xonar Valencio3 years ago
You can infact sell these legally. little known fact is that flamethrowers are not regulated by the federal government. And if there are no local prohibitions on them, they are perfectly legal.
sporgo Valencio3 years ago
What kind of valve are you using?
Just ship it in peices, if you can. I wouldnt mind buying one!
asingh93 years ago
when will you post the construction informatiom??
1-40 of 63Next »