Print PDF
Favorite
Email
Step 7Loading and Fireing
Pic 1: Add the main rubberbands to the end of the barrel.
Pic 2: Attach the same rubberband to the tan connectors at end of the rams. (Note: the rams are cocked in this picture.) Also attach rubberbands to the noted areas. If the bands are too strong, then it won't work.
Pic 3: This is the shell. once you cock the gun, pull the trigger. Then cock the gun again and change the shells for loaded shells. Pull the trigger and repeat.
Pic 2: Attach the same rubberband to the tan connectors at end of the rams. (Note: the rams are cocked in this picture.) Also attach rubberbands to the noted areas. If the bands are too strong, then it won't work.
Pic 3: This is the shell. once you cock the gun, pull the trigger. Then cock the gun again and change the shells for loaded shells. Pull the trigger and repeat.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
