Introduction: K'nex Safety Goggles
Safety goggles can be bought for less than $10. But why waste money when you can make one for almost nothing?
Step 1: Gathering Parts
Okay, first you need your parts:
1. Two red rods
2. Four red connectors
3. Two green rods (the extremely short ones)
4. Four green connectors
5. Six blue rods
6. Two orange connectors
7. A piece of clear plastic (I used the cover of a food container)
8. Duct tape
Step 2: Make Frame
Make the frame as shown in the pics.
Step 3: Make Lens Holder
Make parts as shown in pic
Step 4: Make Ear Hooks
Make what u see in the pics
Step 5: Assemble
Step 6: Add Lens
Cut out the transparent plastic to shape. Use duct tape to stick it to the lens holder (blue rods)
Step 7: Done!
describe this step