K.A.R.9.7 (K'nex Assault Rifle - 97)

 by Owenmon
aah good old nub days. if your on here your either looking for bad stuff against me or are really bored. now go.


PLEASE make this gun before judging it i am getting tired of people saying " looks like a storm 220! and a little bit of the scar 11" it is NOTHING like them. the only reason it looks like a scar is because i build it with metallics. and for the storm 220 i only used the barrel and mag (witch is NOT his)

some credit goes to the jamalam for basic design ( i didn't try to make it like the 220, though)

STATS :

17-round, jam-free magazine (the burrito master's)
TRUE string-trigger
75 ft. range (with 4 tied up 64#'s)
Flexible/strong stock
low-friction barrel (no true barrel)
A comfortable handle
For-grip
accurate scope
_

Piece Count!
_
RODS
_
Green - 160 (=O)
White - 81 (meh)
Blue - 44 (ok)
Yellow - 19 (mmhmm)
Red - 5 (been there done that)
Ramrod - 1 (=P

CONNECTORS
_
Dark Grey - 16
Light Grey - 4
Red - 31
Green - 9
Yellow - 69
Blue - 47
Orange - 97

MISC.
_
Ball Joint Ball - 6
Ball Joint Socket - 2
Y-Connectors - 24
Tan Lock - 10
Silver Spacer - 1
Blue Spacer - 9
Blue Clips - 2 (can be replaced with 2 tan locks)
Fishing Wire (any kind of rope works but just use fishing wire
Scissors
Super Glue
Decapitated Orange Connectors - 2 (or 4 decapitated dark grey connectors)
_

pics

1.The Gun!
2.Other side.
3.i wouldn't suggest sharpening the rods x.x

 
Remove these adsRemove these ads by Signing Up
rrr67 says: Aug 5, 2010. 6:42 AM
since i dont have as many orange pieces as needed, is it possible 2 use yelo connectors instead?
Owenmon (author) in reply to rrr67Aug 5, 2010. 9:01 PM
i guess so
odysseusesperson says: Feb 24, 2010. 8:55 AM
 i hope you vacuumed ur carpet after that lol
Owenmon (author) in reply to odysseusespersonFeb 24, 2010. 4:35 PM
Hmm?

odysseusesperson says: Feb 24, 2010. 8:13 AM
 why do u say we need super glue when its no were in the instructions

HiZpaniK90 says: Aug 19, 2009. 1:16 PM
i still play ps1 games
AlternateLives says: Jun 25, 2009. 1:32 PM
I do see how people could mistake this for the Storm 220. It does look very similar. I'll take your word for it, though.
rosenstyle says: Jun 21, 2009. 7:43 PM
im only gonna say it looks good ill make it then we shall see
ILIKEPIE333 says: Jun 15, 2009. 12:17 PM
looks nothing like a Kar 98k, if that was what you were going for with the name
Owenmon (author) in reply to ILIKEPIE333Jun 15, 2009. 6:27 PM
Actually, that one is called "KSR-98" (K'nex Sniper Rifle) This one is "KAR-97" (K'nex Assault Rifle)
ILIKEPIE333 in reply to OwenmonJun 16, 2009. 11:24 AM
I mean the actual rifle Kar stands for Karabiner, or carbine, in German
ILIKEPIE333 in reply to ILIKEPIE333Jun 15, 2009. 12:18 PM
but it is still a good gun
J4mm3r5 says: May 30, 2009. 10:37 AM
looks like a storm 220! Sorry I had to, no it's very good 4.5*'s
Owenmon (author) in reply to J4mm3r5May 30, 2009. 2:06 PM
=p. Thanks.
J4mm3r5 in reply to OwenmonMay 31, 2009. 9:29 AM
Any time
DJ Radio says: Dec 31, 2008. 6:18 PM
you are right, it DOes look like the storm 220. 4*
Owenmon (author) in reply to DJ RadioDec 31, 2008. 6:26 PM
a little bit. but much cooler and more easy to cock :D
The Jamalam in reply to OwenmonJan 6, 2009. 11:52 AM
i built it and the range is bad. and it looks a bit cooler, but you can never beat the awesomeness of the old 220 model :D
Owenmon (author) in reply to The JamalamJan 6, 2009. 6:53 PM
oh yeah and i had range problems with all of your storm guns... oh well! i'll still make the 224, though. hopefully it'll work for me this time! :D
The Jamalam in reply to OwenmonMar 3, 2009. 8:09 AM
why don't you try them with decapitated greys, that might work better.
Owenmon (author) in reply to The JamalamMar 3, 2009. 9:15 AM
Okay, that's good to know. In case I ever build one of your guns again.
Owenmon (author) in reply to The JamalamJan 6, 2009. 5:28 PM
you probable did something wrong, but for me it works great! and thanks for the complement :-)
Wafflicious says: Jan 6, 2009. 11:58 AM
this is better than the storm 220.... and it only looks like it a tiny bit
The Jamalam in reply to WaffliciousJan 15, 2009. 11:47 AM
...
Wafflicious in reply to The JamalamJan 15, 2009. 12:00 PM
im srry its just about my experience with the storm 220 =)
The Jamalam in reply to WaffliciousFeb 12, 2009. 9:34 AM
build it again
Owenmon (author) in reply to The JamalamFeb 12, 2009. 10:31 AM
Forcing him to build it again isn't gonna help... And besides, the only way for it to work right is to sharpen the ram =P
The Jamalam in reply to OwenmonFeb 13, 2009. 10:06 AM
not rly... mine worked perfectly fine
Owenmon (author) in reply to WaffliciousJan 18, 2009. 4:37 PM
me too, it's just every tan lock gun works terribly with me. T.T
Wafflicious in reply to OwenmonJan 18, 2009. 7:09 PM
hehe
Owenmon (author) in reply to WaffliciousJan 6, 2009. 5:28 PM
thanks! :D
silencekilla says: Jan 21, 2009. 5:29 PM
i love this gun i also made a few mods. 1.) trigger mod 2.) mag pusher mod 3.)a firing pin rail if you want i will post them
Owenmon (author) in reply to silencekillaJan 22, 2009. 6:08 PM
sounds cool! but side rails don't work that well with me. but they are pretty cool >:D
silencekilla in reply to silencekillaJan 21, 2009. 5:30 PM
the firing pin rail also allows you to cock the gun just as easily
Owenmon (author) in reply to silencekillaJan 23, 2009. 5:13 PM
cool post! :D
LordSnipe in reply to OwenmonJan 26, 2009. 6:22 PM
already did. check out the -220 or my MAW or the Pico Tavor. all use a ram-slide design. no that hard to implement in anything.
The Jamalam in reply to LordSnipeMar 3, 2009. 8:07 AM
YOU already did? do you have a second account?
LordSnipe in reply to The JamalamMar 3, 2009. 7:23 PM
perdoname, mesure yes, you did it first. my apologies 0 lord of the k'nex still chill. (sarcasm in a nice way)
Sting Teddy in reply to LordSnipeApr 19, 2009. 6:48 AM
Its "Pardon monsieur?" not perdoname mesure??? Its Great to be CandadianXD jokes
Owenmon (author) in reply to LordSnipeMar 3, 2009. 9:38 PM
LOL (Typing on the wii! >:D)
Owenmon (author) in reply to LordSnipeJan 28, 2009. 9:20 AM
i was going to use the ram-rail until i made the storms.... every 3 64#'s i put on felt like picking up a 20-pound weight with my index finger
LordSnipe in reply to OwenmonJan 29, 2009. 11:22 AM
true, but the gun's efficientcy is increased, and the strain/damadge to the firing pin is decreased
DJ Radio says: Jan 1, 2009. 2:52 PM
what you call a "zero friction barrel" is a fake barrel, zero friction barrels are found on sling guns only.
knexfan9182 in reply to DJ RadioJan 1, 2009. 6:47 PM
no they have friction too
The Jamalam in reply to knexfan9182Jan 15, 2009. 11:48 AM
anything that has a force in a direction that is not in a vacuum has friction
DJ Radio in reply to knexfan9182Jan 1, 2009. 7:00 PM
the guns like the SR-v1 have no friction, the ammo does not touch the barrel at any point.
The Jamalam in reply to DJ RadioFeb 12, 2009. 9:34 AM
air resistance is friction
DJ Radio in reply to The JamalamFeb 12, 2009. 1:08 PM
when I say "friction" I mean friction induced by 2 surfaces rubbing against each other.
The Jamalam in reply to DJ RadioFeb 13, 2009. 10:07 AM
well, if you count air as a surface (seing as it is all around) you could say with solids
toogers in reply to The JamalamSep 16, 2009. 9:17 PM
don't be difficult, please. it's stressing.
knexsuperbuilderfreak in reply to DJ RadioJan 4, 2009. 3:45 PM
it does touch the barrel a little bit
LordSnipe in reply to knexsuperbuilderfreakJan 26, 2009. 6:24 PM
depends on how you scale the barrel. I built a red-width barrel that had little-no friction. took a LOT pf parts and was heavy though...
Owenmon (author) in reply to LordSnipeJan 28, 2009. 9:18 AM
ooh! i made a almost-no friction barrel too! i used 1 blue spacer on each side. the only super hard thing was connecting it to the body..... (never finished T.T)
knexguy says: Jan 5, 2009. 12:28 PM
oh my god you noob how can u say this is not the storm 220! (I wonder how many people were shocked by me speaking like that?) What I actually think is that it looks good and that the design where the pin is pulled back inside the stock like it is here should be used more often.
Owenmon (author) in reply to knexguyJan 5, 2009. 2:30 PM
this isn't the storm 220! it may look like it a little bit, but it's completley different. like the mag breech, the handle, the stock, etc and please build it before judging it :'(
knexguy in reply to OwenmonJan 6, 2009. 9:11 AM
Oh for Goodness' sake, it was a joke. Hardly anyone has any sense of sarcasm online. I have no intention of building it.
Owenmon (author) in reply to knexguyJan 6, 2009. 5:33 PM
Oh. XD sorry its just people here have gotten so angry and stuff about k'nex :( you can't tell if their joking or there as po'd as my dad when i point the iac cannon at someone
knexguy in reply to OwenmonJan 7, 2009. 9:40 AM
Lol. Which one did you make?
Owenmon (author) in reply to knexguyJan 7, 2009. 6:35 PM
v5, but i made v3 and v1, too.
knexguy in reply to OwenmonJan 10, 2009. 3:07 AM
Which one did you prefer? I liked my V2 most.
Owenmon (author) in reply to knexguyJan 10, 2009. 4:39 PM
v3. i gotz as much range on that as the v1. and the wheels pwn
Owenmon (author) in reply to knexguyJan 5, 2009. 2:25 PM
thank you :-)
Bartboy says: Jan 5, 2009. 5:11 PM
I'm sorry, but the only problem with block triggers is that the trigger itself rubs against the ram, decreasing power. That and the feel (but I personally prefer a block trigger than any other gun). This is a lot better than most, but still ....imperfect.
Owenmon (author) in reply to BartboyJan 9, 2009. 7:43 PM
no k'nex block trigger is perfect. except maybe the k'nexsayer XD
Der Bradly says: Jan 5, 2009. 8:09 PM
i am getting tired of people saying " looks like a storm 220! and a little bit of the scar 11

Well it does, but i bet i does not perform like them thou

4 * :D
Owenmon (author) in reply to Der BradlyJan 6, 2009. 5:35 PM
:-D
Der Bradly in reply to OwenmonJan 6, 2009. 6:33 PM
\m/(o_o)\m/

Rocker dude
DrWeird117 says: Dec 31, 2008. 6:59 PM
Nice Storm 220.
Owenmon (author) in reply to DrWeird117Dec 31, 2008. 9:05 PM
the only things that are the same are the mag and barrel T.T
The Jamalam in reply to OwenmonJan 3, 2009. 10:21 AM
a. you should give me credit b.The whole look is basically like it
Owenmon (author) in reply to The JamalamJan 5, 2009. 2:27 PM
ok it does look a LITTLE bit like the 220, but it's completley different :D and look i don't like to argure, so please. and i will give you credit :-)
The Jamalam in reply to OwenmonJan 6, 2009. 11:49 AM
ty lol
Owenmon (author) in reply to The JamalamJan 6, 2009. 5:29 PM
:D
Owenmon (author) in reply to The JamalamJan 3, 2009. 11:40 AM
wut about the mag breech? and the stock, the handle, the trigger, i could go on but i won't
The Jamalam in reply to OwenmonJan 4, 2009. 7:00 AM
and the pictures you took, apart from the last one, they are the same views of my gun even in the same order
The Jamalam in reply to OwenmonJan 4, 2009. 6:19 AM
i said look, not inner workings
DJ Radio in reply to The JamalamJan 5, 2009. 2:53 PM
if the inner workings are different from the ones on your storm 220, then this is almost a completely different gun. remember the famous quote "you do not judge a book by its cover"
The Jamalam in reply to DJ RadioJan 6, 2009. 11:51 AM
i know that, but the thing is the gun LOOKS like mine, i never said its workings were the same. And the saying means something completely different to this
DrWeird117 in reply to OwenmonDec 31, 2008. 9:19 PM
Well...Yeah. Good gun though. 4.5*
Owenmon (author) in reply to DrWeird117Dec 31, 2008. 9:21 PM
:-D
thomaswatton says: Jan 4, 2009. 5:04 AM
storm 220 copy
Owenmon (author) in reply to thomaswattonJan 4, 2009. 1:26 PM
i want to see you do better =P
thomaswatton in reply to OwenmonJan 5, 2009. 3:48 AM
?
Owenmon (author) in reply to thomaswattonJan 5, 2009. 9:08 AM
make one, and try to make it not look like the storm 220. and also, please make it before you judge it
thomaswatton in reply to OwenmonJan 5, 2009. 9:22 AM
sorry, but anyway can't be botherd building it
Owenmon (author) in reply to thomaswattonJan 5, 2009. 2:26 PM
O.o i see
Knex_Gun_Builder says: Jan 4, 2009. 6:39 PM
publish!
Owenmon (author) in reply to Knex_Gun_BuilderJan 4, 2009. 6:54 PM
only for 1 day. everybody's judging it and stuff T.T
anshuvio2 says: Jan 4, 2009. 1:13 PM
uhhh this looks like a stripped down SCAR 11.01 as well as a Storm 220
Owenmon (author) in reply to anshuvio2Jan 4, 2009. 1:27 PM
why is everyone judging it on what it looks like T.T
The Jamalam says: Jan 3, 2009. 10:19 AM
Looks almost just like the storm220
builder968 says: Jan 1, 2009. 6:43 AM
im short 10 green rods, is there any way i could substitute them?
Owenmon (author) in reply to builder968Jan 1, 2009. 11:01 AM
oh and also if you don't make the handle pads you will save 4 orange connectors (this gun uses 97 O.O)
benfoxg in reply to OwenmonJan 1, 2009. 5:25 PM
my gun uses 350 0.0
Owenmon (author) in reply to benfoxgJan 2, 2009. 11:34 AM
i have like 400 :D
Owenmon (author) in reply to OwenmonJan 2, 2009. 11:35 AM
i gotz like 3 screamin serpent sets and they come with like 150 black/orange connectors in each box
Owenmon (author) in reply to builder968Jan 1, 2009. 10:49 AM
all that i can think of is don't make the handle pads and take out 2 green rods from the handle
Owenmon (author) in reply to OwenmonJan 1, 2009. 10:54 AM
and the piece list might be a little off...
benfoxg says: Jan 1, 2009. 3:38 AM
I MIGHT make it... can I have a pic of the breech?
Owenmon (author) in reply to benfoxgJan 1, 2009. 10:47 AM
step 4, pic 6
benfoxg in reply to OwenmonJan 1, 2009. 5:26 PM
eh, I don't think I'm going to build it now. sorry, I like it,but I do not have a good past with those breeches =(
Owenmon (author) in reply to benfoxgJan 2, 2009. 11:34 AM
why not?
erikos kostarikos says: Jan 1, 2009. 6:02 AM
the rubberbands are a face=)
Owenmon (author) in reply to erikos kostarikosJan 1, 2009. 11:02 AM
kind of like this on O_o
Owenmon (author) in reply to erikos kostarikosJan 1, 2009. 10:54 AM
it looks like a creeped out face
Knex_Gun_Builder says: Dec 31, 2008. 6:23 PM
(removed by author or community request)
Bartboy in reply to Knex_Gun_BuilderDec 31, 2008. 7:00 PM
ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc sssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Owenmon (author) in reply to BartboyJan 1, 2009. 11:02 AM
ccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc sssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc sssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc sssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc sssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss teeheehee
Knex_Gun_Builder in reply to BartboyDec 31, 2008. 9:47 PM
ok ok ill stop.
Owenmon (author) in reply to Knex_Gun_BuilderJan 5, 2009. 2:31 PM
you can keep on doing it! :D
Bartboy in reply to Knex_Gun_BuilderJan 1, 2009. 12:44 AM
No, it's cool!
Knex_Gun_Builder says: Dec 31, 2008. 9:47 PM
5 stars!!!!
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!