Introduction: KNEX AUTOLOAD RIFLE WITH HOPPER

Picture of KNEX AUTOLOAD RIFLE WITH HOPPER

THIS GUN HOLDS 10 BLUE RODS.IT FIRES TO A RANGE OF 15 METRES AND FIRES FIVE BLUE RODS IN 10 SECONDS

Step 1: THE BARREL

Picture of THE BARREL

THE BARREL IS VERY IMPORTANT SO PAY ATTENTION TO MY INSTRUCTIONS

Step 2: THE MAGAZINE

Picture of THE MAGAZINE

THIS MAGAZINE CAN HOLD 10 BLUE RODS.

Step 3: THE HANDLE

Picture of THE HANDLE

THIS IS NOT THAT IMPORTANT.IT IS VERY EASY THOUGH.

Step 4: THE HANDLE

Picture of THE HANDLE

THIS IS MY HANDLE.IT NOT SO IMPORTANT ON THIS GUN

Step 5: Puting It All Together

Picture of Puting It All Together

this is easy apart from putting the magazine on.you have to get it in position then push forwards and it should clip on.

Step 6: Adding Rubber Bands

Picture of Adding Rubber Bands

add as many as you like

Step 7: Loading and Firing

youto push 5-10 blue rods into the back of the hopper like on oodalumps 7 shot hopper.then pull back the ram until it loads then push down the trigger

Comments

frodo7 (author)2008-12-12

rifle?

Stavroz (author)2008-08-16

looks cool but i thinhk the gun itself still needs some work. nice system anyway.

buterSBob29 (author)2007-10-21

cool gun

Kaiven (author)2007-04-28

no.don't use all caps. Nice gun though :)

Whaleman (author)2007-04-28

SEEMS KOOL, BUT WHY IN CAPS??? But seriously, kool.

Darth Trainman (author)2007-04-25

very similar to the MacBeasty's gun but its okay, i guess. not horrible.

sammyb (author)2007-04-25

this looks cool i might make good pictures

About This Instructable

3,317views

7favorites

License:

More by knex man:KNEX AUTOLOAD RIFLE WITH HOPPER
Add instructable to: