Introduction: K'NEX CAMERA CART

Picture of K'NEX CAMERA CART

YOU DON'T HAVE TO STICK TO THIS, SO BE CREATIVE !

IF YOU WANT TO WATCH MY VIDEO TUTORIAL; ITS FINALLY HERE:

https://www.youtube.com/watch?v=S9vnKnLFGHQ

Step 1: STEP 1:- YOU'LL NEED

Picture of STEP 1:- YOU'LL NEED

- 4 X WHEELS

- 2 X WHEEL STOPERS

- 13 X GREY STICK STOPERS

- A MOTOR, IF YOU HAVE ONE

- 6 X GREY STICKS

- 4 X YELLOW STICKS

- 4 X WHITE STICKS

- 2 X RED STICKS

- 5 X TINNY STICKS

- 2 X WHITE CONECTORS

- 5 X ORANGE DUAL CONNECTORS

- 8 X YELLOW 5 CONNECTORS

- 20 X RED 3 CONNECTORS

- SPACERS; BLACK SQUARE 5CM SIDES, GREAY TRIANLE 2.5CM SIDES X 2

- 6 BLUE THIN SPACERS

- 9 GREY THICK SPACERS

Step 2: STEP 2

Picture of STEP 2

- 2 X WHEELS

- 2 X GREY STICK STOPPERS

- 3 X GREY STICKS

- 4 X RED 3 CONNECTORS

- 2 X YELLOW 5 CONNECTORS

- 2 X ORRANGE DUAL CONNECTORS

- 9 X GREY THICK SPACERS

- 6 X BLUE THIN SPACERS

PUT THESE PEICES TOGETHER THE WAY THEY ARE SHOWN IN PICTURE

Step 3: STEP 3

Picture of STEP 3

- MOTOR

- 2 X WHEELS

- 2 X WHEEL STOPPERS

- 2 X WHITE 8 CONNECTORS

- 8 X GREY STICK STOPPERS

- 4 X RED 3 CONNECTORS

- 2 X YELLOW 5 CONNECTORS

- 2 X BLUE THIN SPACERS

PUT THEESE TOGETHER SHOWN IN THE PICTURE, YOU SHOULD BE LEFT WITH THE TWO STEPS RELATIVLY SIMILAR. IN THE SECOND PICTURE.

Step 4: STEP 4

Picture of STEP 4

- 2 X ORANGE DUAL CONNECTORS

- 2 X RED STICKS

CONNECT THE LAST TWO STEPS AS SHOWN IN THE PHOTOS

Step 5: STEP 5

Picture of STEP 5

- 2 X GREY STICK

- 4 X RED 3 CONNECTORS

- 4 X YELLOW STICKS

CONNECT THEM AS SHOWN IN THE PICTURE, YOU WILL HAVE ENOUGH PEICES TO DO TWO OF THESE

Step 6: STEP 6

Picture of STEP 6

- 4 X WHITE STICKS

- 4 X RED 3 CONNECTORS

- 2 X YELLOW 5 CONNECTORS

PRODUCE TWO OF THAT IN THE PICTURE ABOVE

Step 7: STEP 7

Picture of STEP 7

- 4 X RED CONNECTORS

- 1 X ORANGE DUAL CONNECTOR

- 2 X GREY 2.5CM TRIANGLE SPACERS

CONNECT AS SHOWN IN THE PICTURE

Step 8: STEP 8

Picture of STEP 8

- 1 X BLACK 25CM PERIMITER OF SQUARE SPACER

CONNECT THE LAST 3 STEPS AS SHOWN IN THE PICTURE ABOVE

Step 9: STEP 9

Picture of STEP 9

CONNECT THE TWO STAGED PROGRES TOGETHER AS SHOWN IN THE PICTURE

Step 10: STEP 10

Picture of STEP 10

ADD CAMERA BY SKREWING IT ON LIKE SHOWN ON PICTURE, I SUGGEST USING A GO PRO HERE BUT MOST SMALL CAMERAS TRIPOD WILL FITT THROUGH THE HOLE IN THE BLACK SPACER AS SHOWN. SET THE MOTOR AWAY AND RECORD THE FLUENT MOVEMENT.

THE GO PRO CART CAN BE USED ON MOST SURFACES, REMEMBER THIS IS NOT A SET WAY OF DOING IT, CREATE YOUR OWN ( LIKE SHOWN IN THE PHOTO ABOVE) (you can make them so useful for outdoor use)

I ENJOYED MAKING THIS SO MUCH AND FOUND OUT HOW USEFUL IT IS, SO I MADE A VIDEO FOR YOU GUYS TO FOLLOW IF YOU STILL FIND IT DIFFICULT,

SEETHE NEXT STEP FOR MORE INFO

Step 11: MORE INFO...

Picture of MORE INFO...

REALLY BE CREATIVE IN YOUR OWN WAY, YOUR BOUND TO MAKE THE PERFECT NON MOTORISED GO PRO CART.

IF YOU NEED MORE INFOMATION, OR YOUR SIMPLY STUCK ON A CERTAIN SETP PLEASE USE MY VIDEO:

PLEASE SUBSCRIBE TO ACTIVE BOARDOM, AND LIKE THE VIDEO.

Comments

braytonlarson (author)2015-06-14

My childhood. would have been at least 3 times better if I had known there were motors for k'nex

sandroknexmaster (author)2015-06-14

Cool!

About This Instructable

373views

1favorite

License:

More by Active Boardom:K'NEX CAMERA CARTFoldable LongboardBLANK START
Add instructable to: