Print PDF
Favorite
Email
Step 5The Shelves
I would (i did) measure and make the shelves before I attached the top kee klamps and fence post. To measure for the shelf size attach the Horizontal Swivel Socket Member (funny name) and measure from the inside of one Horizontal Horizontal Swivel Socket Member to the other.
If your good you could figure out the sizing before hand but my brain does not work like that, I get a good idea of what I will need, sizes, etc. and start building.
Notice how my Horizontal Swivel Socket Members angle in (~45 degrees) that was not originally how I intended them to end up, I cut the first shelf wrong (to small) and angled in the Horizontal Swivel Socket Members to fit rather than buy another piece of ply-wood. I added the 1"x1" to help beef up the shelves where the bolts went through.
If your good you could figure out the sizing before hand but my brain does not work like that, I get a good idea of what I will need, sizes, etc. and start building.
Notice how my Horizontal Swivel Socket Members angle in (~45 degrees) that was not originally how I intended them to end up, I cut the first shelf wrong (to small) and angled in the Horizontal Swivel Socket Members to fit rather than buy another piece of ply-wood. I added the 1"x1" to help beef up the shelves where the bolts went through.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
