Print PDF
Favorite
Email
Step 3Prep the parts - continued
Now that you have all your holes drilled, it's time to finish the prep work.
1. Attach the wire to the can.
Cut yourself plenty of wire to work with, and make sure it has good contact with the metal of the can.
2. Attach the thread to the can.
Tie one end of the thread to the can. Cut a few feet to ensure there will be enough to suspend it.
1. Attach the wire to the can.
Cut yourself plenty of wire to work with, and make sure it has good contact with the metal of the can.
2. Attach the thread to the can.
Tie one end of the thread to the can. Cut a few feet to ensure there will be enough to suspend it.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
1
Jan 31, 2009. 9:38 AMsourcer
says:
should the bucket be metal too?
Reply
 |
Add Comment
|
