Introduction: Key Shelf

Picture of Key Shelf

find a beautiful board for the back

and mark where you want to cut

Step 1: Cut a Slot

Picture of Cut a Slot

in the shelf on three sites

Step 2: Cut the Edges

Picture of Cut the Edges

if you want (not necessary)

Step 3: Connect

Picture of Connect

the two pieces with mortise and tenon

or with pocket holes

Step 4: Add a Hanger

Picture of Add a Hanger

I glued a little piece of wood with a wire on the back

Step 5: Finishing

Picture of Finishing

with linseed oil or what you want

Step 6: Watch the Video

for more details


Mihsin (author)2015-11-14

Simple, free style, and no hardweare. Very good 'ble

StephanP1 (author)Mihsin2015-11-14


desertsniper (author)2015-10-16

genius design!

StephanP1 (author)desertsniper2015-10-16


jayeff (author)2015-10-16

Awesome idea!

StephanP1 (author)jayeff2015-10-16

Thank you jayeff.

ClenseYourPallet (author)2015-10-15

Beautiful project and simple instructions... Love it

Thank you ClenseYourPallet.

About This Instructable




Bio: If you like simple solutions then here you can find some of my crazy ideas.
More by StephanP1:Simple and Precise Height GaugeRubber Band Powered Bench Dogs Awesome Tape Measure Improvement
Add instructable to: