Introduction: KeyChain Lighter

Picture of KeyChain Lighter

3D print flashlight

Step 1: Materials

Picture of Materials


  1. Battary CR2032 (3v)
  2. 3 Led 5mm (3V) any collor
  3. Printed parts

Assembly instructions

3D print setting:

  • Nozle diametr 0.25mm
  • layer thickness 0,05mm

Video 3D printing

Let`s start! ^_^

Step 2: Solder

Picture of Solder

Now, you need solder leds as at the photo.

Step 3: Install

Picture of Install

Insert leds and battery in the body. And install strip as the photo.

Step 4: Assemble

Picture of Assemble

Okay, lets assemble our lighter and tighten the screws.

Step 5: Finish

Picture of Finish

If your keuchain light when you push the button, you made all steps right.

Please support me, subscribe to my chanel ))
My project:


DIY Hacks and How Tos (author)2016-11-29

Cool. It could be really useful to carry one of these around with you.

About This Instructable




More by Genius_Nik:Simple change filament while printingHow make VibroBug on the 3d printerArduino Bluetooth Control Robot
Add instructable to: