With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I had a really old keyboard lying around that I planned to use to make a Keylendar. Upon opening it up I noticed that the circuit sheets were a reall...
Old or unwanted keyboard Light and power source ( I used an LED puck light connected to a USB cable) Metal tin Glue Clear packing...
The keyboard circuit sheets can vary in appearance so unfortunately there is no way of knowing whether you circuit sheets will be as pretty as these. ...
Apply clear packing tape to one edge of the sheet, roll it into a cylinder and tape the edges together. Fold any excess tape over the rim or cut off....
For the light source I used a LED puck light powered by my computer through a USB cable. If you have never made a USB light before simply strip ...
We will need a hole in the lampshade for the cable to exit. With the hole punch make a hole on the circuit sheet cylinder just above the edge of the b...
Once the circuit sheet cylinder and light source is ready simply put it all together and glue the base and top on. I used the metal lid and bottom of...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
ChrysN (author)
in reply to Aug 15, 2011. 3:48 PMReply23,374 views
229 favorites
Posted:
Feb 23, 2011
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »