Instructables
Picture of Keyboard Thumbtacks
IMG_3444.jpg
IMG_3442.jpg
IMG_9856.jpg
Old hacked up keyboard keys + push pins = awesome keyboard thumb tacks! In just a few minutes I modified some keys from old keyboards, hot glued push pins inside of them, and presto, made some keyboard thumbtacks.
 
Remove these adsRemove these ads by Signing Up

Step 1: Materials

Picture of Materials
This project only requires a few things:

  • liberated keyboard keys

I got mine from the fine folks who work at the Computer Museum of Austin during Maker Faire Austin this year, but you can take any old keyboard and wedge a screwdriver between the keys and the keyboard to break them off.

  • map style push pins

The heads of thumb tacks are just too large to fit inside the well on the back of the keys. Classy map push pins are the perfect size. I used something like this.

  • Dremel tool, or a pair of pliers, or small hand saw, or an exacto knife
  • drill with drill bit to match the diameter of the head of the push pin. Mine required a 3/16" drill bit.
  • hot glue gun

Step 4: Drill out a hole for the push pin

Picture of Drill out a hole for the push pin
IMG_9860.jpg
Next, drill out a hole to clean up the cut you just made with the Dremel and clear out a place where you can glue in the head of the push pin. The push pins I got required a 3/16" drill bit.

Be careful not to go all the way through and ruin the key, or drill into your finger.

Step 5: Put hot glue in the hole

Picture of Put hot glue in the hole
Shoot some hot glue into the hole.
1-40 of 50Next »
CobyUnger made it!5 months ago

I did a laptop key version too. Great idea.

Photo 2014-03-23 04.28.19 PM.jpg
lindseyb939 months ago
I ADORE THIS! <3
Brings out my inner nerd.
swaroop9111 year ago
awesome..! :)
sorjynx4 years ago
 nice revolutionary and techy idea.. i got bunch of broken key and now i got a great innovation for them
Treknology4 years ago
Warning! From the left in the reject box, #2 is an ALPS switch top and #3 is a Cherry switch top. I don't recognise the other two off the top of my head,

These are extremely valuable and are proving harder and harder to find--and a well worth something on eBay for people trying to built "just the right keyboard".

The four in the lower "OK" boxes are obviously from membrane keyboards--so go for broke.

I mention this here, because in your Part 1 Instructable, it seems you have used Cherry and ALPS tops as well
PoeDunkMae4 years ago
Great idea!
man585624 years ago
Cool idea.  I have a great boss that just doesn't get the idea of dual monitors.  The second mopnitor he uses as a post-it board.  I'm going to use this, plus I'm planning on gutting a dead LCD and replace the screen with cork board.  I get another working monitor and he keeps his post-it holder and geek-cred is slightly upped.
AspenHarper4 years ago
 GREAT IDEA!!! THANKS A LOT!
comander014 years ago
April Fool's idea--- Drill a hole in the TOP of the key. Follow the rest of the instructable but glue the tack to the keyboard and replace the key. When someone hits the key, they stab themselves! Instant Comedy!
ozh4 years ago
Veeeerry cool idea. I think I'm going to convert keys into fridge magnets also :)
Kaiven5 years ago
Nice! Ju*t wi*hed I didn't pull out the "$" on my keyboard...
rofl
it might be better to not push the pin all the way so that you have more of the sharp pointyness
hey i was wondering if you could just glue on the pin without drilling the whole
hehehe i like the magnets idea, the thumbtacks will work great too:P i just got 6 or 7 keyboards from my school, so i have over 700 keys to use *evil laughter*
dollywild5 years ago
Very cool- I think I will make some for the co-worker gift exchange. Would be a cool gift for a kid, too, using their mane letters.
this is a great Idea! I was wondering what to do with my old dead keyboards, now I Know what to do.
djpolo985 years ago
you also can put magnets on the place of the pin
Kopolis7775 years ago
This was in a popular science magazine. Props man props!
This would be especially cool with old terminal keyboards ... more keys, different words, usually double-shot (letters slower to wear off).
Chico5 years ago
I loved this idea and I tried it right away. I made a couple of discoveries, it's hard to cutoff the plastic with the Dremel, so I just used the wire wheel on my grinder (a wire wheel on a Dremel would probably be too weak). The wire wheel chewed off the excess plastic within seconds and I gripped the keys with a pair of pliers to hold them securely (and away from my fingers). The other thing was that it's dangerous to push the push pin into the key with your bare finger (mine had to be jammed in there a little bit). A thimble works great for that!
gripping the shaft of the pin with needlenose pliers is as safe as the thimble, and has two advantages for some of us guys: a) it doesn't dull the end of the pin, and b) they're more likely to be in a guy's toolbox than a thimble.
duckducrot5 years ago
Love this idea. I'll try this with little button magnets. I use a metallic message board. I plan to adhere the magnets with extra-strength permanent glue dot adhesive. These would make nice, inexpensive holiday (for me, Christmas) gifts. Up-cycling is so in right now.
i like the magnet idea - w enough keys you could even leave messages on the fridge, spellt out!
Great minds think alike, I had the same idea when I saw this instructable! I'm thinking using keys from a laptop (if I find any) would be nice for magnets as they are thinner. I think the thickness of the magnet will make the key stand out just enough to look good but not so much as to be knocked off when brushing past the fridge. I like the big keys with complete words like "home" and "enter". Used keyboards often have worn out unreadable blank keys. It would be cool to paint in new words or characters like "hope" or smileys so that people wonder what kind of keyboard they're from.
My dad types so much when I look at his keyboard i see some of the letters are polished unlike mine which is still textured and dull.
Lol, even before i read the comments i thought of spelling things out with them...
dz00044555 years ago
that is very very cool!
paulareno5 years ago
Not the smartest thing but if you have alot of experience with drills and power tools like me and from the looks of it Noah aswell you should be fine. Ps, drilling your fingure really does hurt :(
hehe...Yeah I tried to drill the carbon fiber outta the mount hole where a skid broke off in my blade CP+ R/C heli....Small bit, went thru the side of my index finger stopped at the nail....Yeah it hurt for awhile. I learned that 11.99 for the heli frame was cheaper than trying to repair it !!
*not rudely* how do you know? have you done it yourself? if so, ouch!
Yeah i done it once when i was trying to trill a tiny piece of plastic, the bit jumped off the plasit and straight into my fingure and wow there was blood everywhere and my fingure hurt for like 3 weeks. i was about 10 yrs old at the time and from than on i have always used a vice while drilling ;)
Ouch... lol
kewlkiwi5 years ago
Brilliant idea! Great way to salvage *something* from the old keyboards that seem to collect in the closet.

This is an 'Ah-hah!' instructable...
If this was published on the third, how can that comment be on halloween? Great idea by the way
The person who posted on Halloween has already built a flux capacitor from a earlier instructable
Maybe a collaborator or something like that. idk. Strange. Lovely instructable none the less.
Wow. That's kinda weird.
do not it this way! you will make a hole in your fingure!
rattyrain5 years ago
This is just wonderfully marvelous.
1-40 of 50Next »