Step 6: Insert the head of the push pin
Carefully push the head of the push pin into the little pool of hot glue making sure to submerge it far enough so that it's good and stuck, but not too far so that an insufficient amount of the pin is left sticking out.
Use your pointer finger to hold the tack in place (vertically) as the glue sets.
Use your pointer finger to hold the tack in place (vertically) as the glue sets.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
freekofnature
says:
Dec 2, 2009. 8:56 AMReply
it might be better to not push the pin all the way so that you have more of the sharp pointyness
Visit Our Store »
Go Pro Today »
