Keyboard/Sudoku Rubik's Cube...dead computer contest

Step 4 Letting the Epoxy Dry

After I had the keys on the cubies, i put them in a clamp to dry.  I placed a thin piece of wood between the cubies and the clamp so I could put 4 under one clamp and so the pieces wouldn't get damaged.  I used a wooden saw-horse, but i'm sure the work bench you have would work just fine.  Clamping is not critical, as the center piece wont come off and it would be a hassle to try to clamp it, but i felt i needed to add pressure to the pieces so they wouldn't slip.

After the epoxy dried, i repeated steps 3 and 4 until all six sides were completed.