With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is my very first instructable please rate and common Thanks e...
Most of the materials can be found at home there are a couple of things I left out in the picture so be sure to read this list first before starting...
We want to be able to have an escape for the smoke, without making a hole in the roof so I found a spot in my attic beside the chimney. Hover your...
Lets get started with your sheet of metal Cut your material according to the dimensions given on the picture.
Get same sheet of material and cut the dimensions as shown there is a lot of cutting so that why thin floppy easy to cut wood is better[ metal sheets ...
Place your 22cm by 22.5cm square onto the middle triangle on step three then draw your line as shown in the picture.
Hover your mouse over the picture. Cut a vertical line from the corners of the hollow triangle formed in the picture from the previous step. Results ...
Get your drill and drill two holes starting on the wood beam once you have worked your way through the wood drill through the masonery. When you are ...
Get your 11.25cm by 22cm sheet of material that you cutted out in step 4 and screw it on either side of the beam it should fit perfectly covering ...
Get a strip of wood or metal the same size as the one that was screwed onto the wall in step7, and clamp it onto the edge of the strip of wood that w...
Get your 22cm by 22.5cm sheet cuted out in step 4 and secure it into the front with four screws make sure it looks nice.
At an approximate 82 degree angle fix a braket beside the box and place an other one 40cm away from that one at the same angle.
Get your right triangle from step 3 and place it on top of the two L shape brakets. Then secure the board with four bolts. [small ones, smaller the b...
Get two more L shape brakets then secure them underneath the face of the square box, that has been set on the wall. See picture for reference. But I ...
Get your middle triangle from step 3 and attach it with 4 nuts & bolts, on the shorter side.
On the left hand side do the same as you did in step 11 & 12. On the top fit rectangle piece of material 11.25cm by 22cm then secure...
Get the small triangles that were cutted out in step 5&6 then clamp it underneath the between the two flaps.then drill two small holes through the tw...
Now you obviously dont want your fire place to be faulty, by having smoke coming out of the gaps so seal of all edges with sealent. I used no more na...
Now you need to connect the pipe to the chimney. I used metal/plastic ones. First you drill three large holes on the top and do the same with the ...
Spray your fire place top or paint it with whatever colour you like i used silver. Well those who are wondering how it can be used as a c...
Sit down and enjoy the fire Thanks everone for looking at my first instructable ...
Lets get started with your sheet of metal
Cut your material according to the dimensions given on the picture.
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »