Picture of KillerK's MAGNUM
Since KillerK would not post his MAGNUM I decided to take matters into my own hands. Plus, all these kids who don't have enough skill to build it from the pictures he's posted were begging me to. So here it is, KillerK's MAGNUM.

Remove these adsRemove these ads by Signing Up

Step 1: The Barrel.

1.)Build these.
2.)Add these.
3.)Connect them.
4.)Begin assembling the barrel. (If you are confused about which sections you connect, refer to picture 5.)
5.)The product of step four.
6.)Connect to section from pictures 4 & 5. (If you are confused refer to picture 7.)
7.)Product of 6.
8.)What you should have.

Step 2: Barrel Connectors.

Picture of Barrel Connectors.
1.) Build these.

Step 3: Handle & Trigger Guard

1.)Build this.
2.)Build this.
3 & 4.)Inset 1 into 2.
5.)Product of 3 & 4.
6.)What you should have so far.
7.)Add these.
8.)Add the rest of the greens.
9.)Build these.
10.)Add them to the Handle.

Step 4: Ram & Trigger

Picture of Ram & Trigger
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02259.JPG
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02265.JPG
1.)Take a normal green connector piece and cut this part off with a hammer and a screwdriver like this.
2.)Finished Product.
3.)Connect it like this.

Step 5: Putting the rear of the barrel together.

1.)Put these on these things.
2.)Connect them to the end of the upperportion of the barrel like this.
3.)What you should have so far.
4.)Add the bottom portion of the barrel to the piece recently added.
5.)What you should have so far.
6.)What you should have so far.
7.)Add these to strengthen the gun.

Step 6: Putting the front end of the barrel together.

Picture of Putting the front end of the barrel together.
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02241.JPG
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02244.JPG
1.)Connect these two things like this.
2.)add it to the front like this.
3.)Add these to the front.

Step 7: Inserting the Ram.

Picture of Inserting the Ram.
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02249.JPG
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02250.JPG
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02251.JPG
1.)This is what you are inserting.
2.)Create a bow in the middle of the barrel like so.
3.)This is the easiest way to insert it.
4.)This is how it should look if you did it properly.

Step 8: Add the actual Barrel.

Picture of Add the actual Barrel.
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02246.JPG
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02248.JPG
1.)You slide this piece into here.
2 & 3.)This is what it should look like if you did it porperly.

Step 9: Adding the Handle & Trigger.

Picture of Adding the Handle & Trigger.
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02270.JPG
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02271.JPG
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02294.JPG
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02296.JPG
1.)Take this piece...
2.)And connect it here...
3.)Like this.
4.)Connect the Handle.
5.)Add these little guys here.

Step 10: Adding the Rubberbands.

Picture of Adding the Rubberbands.
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02302.JPG
1.)Put one like this.
2.)Put the other like this.

Step 11: Mods

Picture of Mods
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02305.JPG
C:\Documents and Settings\Austin\My Documents\My Pictures\2007-05-14\DSC02306.JPG
1 & 2.)These keep the "safe" out of the way.
3.)This really isn't a mod, but these are my some possibilities of KillerK's "MAGNUM Round." If you try to just shoot a normal rod, it will either fall inside the gun and jam it and possibly break your ram, or will just simply fall out. This is my solution.
1-40 of 112Next »
ttran-12 years ago
do you need to break it to make it work???
knexcannon4 years ago
not sure
misectet5 years ago
he doenst work
KnexFreek5 years ago
amazin pictures bravo!!!! wow best quality pictures of just about any knex instructable on this site!!! great job!!! also thnx for posting his magnum
Look at my pics on the TR18.
 LOOK at my pics on my freeslinger... and yes i know they are good on the tr18 bu these pics are awesome on this gun c'mon right??
Meh. Pretty good. Lol.

LOOK at the really close-up picture of the turret on it, whaddayathinkofthat?!?
 Its very nice quality.
 How far does it shoot? 
Tominator7 years ago
the trigger is abit dodgey for me, is it for any1 else?
i could not get it to work so i built a new one.
i did not make this for a while til i broke a green connector by acdicent
Master_Zane6 years ago
What does it shoot?
yellow rods with ball-socket joints on the end.
i made the gun and it is AWESOME but i just want to know is there any way to add just a magazine to it? :) let me know cause i need your help :)
An Villain6 years ago
add red transition rod on the orange piece for MAXIMUM DAMAGE
is the orange (barrel) piece snapped in or it 'just kinda sits in there' lol xD
it just fits snugly with the green rods holding id steady
omg let's just say this...I LOVE this gun it has awesome power and accuracy
Metal4God8 years ago
what would happen if you didn't cut the green connector. BTW Love the gun =D
quincy85wrestler (author)  Metal4God8 years ago
it wouldn't work, and thanx.
hwere did killerk post a pictur of his magnum?
how far does this shoot?
quincy85wrestler (author)  knex boy8 years ago
mine shot about 75FT.
post how to load and my one is rubbish (dosent even shoot 10ft)
dude, add more rubber bands!
quincy85wrestler (author)  knex boy8 years ago
uh..you stick the ammo from step 11 in the orange connector in the front. tadah! and.. then you probably built it incorrectly. i got about 75-90FT.
I got 110ft with 2 rubberbands.
i dont get it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
would it work with a yellow connecter
quincy85wrestler (author)  Metal4God8 years ago
a broken yellow connector because i have a broken yellow piece where you cut the green connector.
DrWeird1176 years ago
what is that orange bit at the top of pic 1
its a track splice. link
ashchetm8 years ago
i cant get mine to shoot very far cuz the ram breaks with more than to wimpy ubber bands on it, ps i made the broken piece trigger, but it doesnt work well, any alternative?
I also used one of those twist-ties to keep it together, very effective.
Tape the ram together, I did and it works very well.
1-40 of 112Next »